Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 84
In [MIRROR], select the desired mirror mode and click, In [MOTION], select either ON or OFF,
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
OFF: Does not increase vertical resolution while using the electronic zoom. Use the mirror function to electronically flip the displayed subject. If you installed the camera upside down or intend to monitor the subject in the mirror, configure the following settings according to the installation environment of the camera. In [MIRROR], select the desired mirror mode and click SET . OFF: Disables the mirror mode (normal video). H: Flips the video horizontally. V: Flips the video vertically. HV: Flips the video vertically and horizontally. The configured settings are applied in common to all the camera views. Configure to turn ON or OFF the motion sensor function for each camera view. If you do not have to detect the motion in subjects, set [MOTION] to "OFF". In [MOTION], select either ON or OFF, and click SET . The configured settings are applied only to the camera views that were specified in [VIEW]. You cannot configure [MOTION], if the electronic sensitivity boosting (SENSE UP) or the long exposure shutter mode (LONG) is enabled. You can configure the privacy mask settings to hide specific portions of surveillance video for privacy protection. When a privacy mask is set, the resolution, frame rate, and image quality of the live video image may be limited. Working with Administrator Configuration Screens 38/79