Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 24
In [Control Panel], click [Network and Sharing Center].
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
6 Select the [Use the following IP address:] radio button and specify the IP address, the subnet mask, and the default gateway. 7 Check the configured settings and click OK . You are now done with the TCP/IP configuration. Close all the dialog boxes that are open. 1 In [Control Panel], click [Network and Sharing Center]. The [Network and Sharing Center] dialog box opens. Before You Begin Network Operation 9/13
6
Select the [Use the following IP address:] radio button and specify the IP address, the
subnet mask, and the default gateway.
7
Check the configured settings and click
OK
.
You are now done with the TCP/IP configuration.
Close all the dialog boxes that are open.
1
In [Control Panel], click [Network and Sharing Center].
The [Network and Sharing Center] dialog box opens.
Before You Begin Network Operation 9/13