Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 109
In [SD MEMORY CARD] or [HDD], select USE.
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Click SD/HDD button in the configuration menu to display the SD/HDD screen. If you install a recording medium such as SD memory card or external hard disk drive on the camera, you can record video images and store log information in it. To do so, install a recording medium on the camera and format it through this screen. Required operation privilege: admin, operator1 In cases where both an SD memory card and an external hard disk drive are simultaneously connected, the hard disk drive takes precedence. 1 In [SD MEMORY CARD] or [HDD], select "USE". If you are removing the SD card or hard disk drive from the camera, select "NO USE". 2 To record log information, configure [LOG] to "ON". The log recording area is automatically configured so that approximately 16,000 access logs and 16,000 system logs can be stored respectively. The recorded log information is retained even when the camera power is turned off. 3 In [AREA], allocate the storage areas. NORMAL (1 to 98): Recording area for normal video ALARM (1 to 98): Specify the recording area for alarm video and backup video in the event of a network failure. 4 In [SIZE/FORMAT], check that the storage capacity of the SD card ("4GB" for example) is shown. This field shows "NO CARD" or "NO MEDIA" when the camera has no recording media installed and "FORMATTED" when it has a formatted media installed. 5 Click FORMAT . An operation confirmation dialog box opens. Click OK to start formatting the SD card. Working with Administrator Configuration Screens 63/79