Sanyo VCC-HD5400 VCC-HD5400 Manual - Page 121
In [HOLIDAY], select the day of the week that you want to define as a weekly holiday.
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Configuring the camera to start recording at 13:00 and end recording at 23:30 every day (10 hours 30 minutes every day) 3 Select the check box next to the recording period (day) you want to apply and click SET . The schedule map appears, showing the recording period you configured for each day of the week and enabled by selecting the check box. If both the check box for a day of the week (SUN to SAT) and the "DAILY" check box are selected, the "DAILY" setting will take precedence. Normal recording: Blue Alarm recording: Orange On the schedule map, each recording period will be indicated in units of 15 minutes. If you have changed the schedule settings, be sure to click SET to update the schedule map. If you change the scheduled settings while the schedule is enabled, the camera will perform recording according to the changed schedule. If you schedule overlapping recording periods, the longer one will take precedence. If the configured periods overlap as shown below, they will be combined into one long period. Follow the steps below to define your holidays. 1 Click HOLIDAY . The HOLIDAY SETTINGS screen appears. 2 In [HOLIDAY], select the day of the week that you want to define as a weekly holiday. 3 In [MONTH/DAY], select the day of the year that you want to define as an annual holiday. To each day of the year configured here, the same operation schedule as that for the weekly holiday setting in [HOLIDAY] will be applied. Working with Administrator Configuration Screens 75/79