D-Link DGS-3130 User Manual - Page 100

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter VID List Status Description Enter the VLAN ID(s) that will be used in this configuration or display here. A series of VLAN IDs can be entered separated by commas or a range of VLAN IDs can be entered separated by a hyphen. Select to enable or disable the MAC address learning function on the VLAN(s) specified here. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the available entries. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MAC Address Table This window is used to view the entries listed in the MAC address table. To view the following window, click L2 Features > FDB > MAC Address Table, as shown below: Figure 5-6 MAC Address Table Window The fields that can be configured are described below: Parameter Port VID MAC Address Description Select the stacking unit ID and the port number of the Switch that will be configured here. Enter the VLAN ID that will be used for this configuration here. Enter the MAC address that will be used for this configuration here. Click the Clear Dynamic by Port button to clear the dynamic MAC address listed on the corresponding port. Click the Clear Dynamic by VLAN button to clear the dynamic MAC address listed on the corresponding VLAN. Click the Clear Dynamic by MAC button to clear the dynamic MAC address entered. Click the Find button to locate a specific entry based on the information entered. 90