D-Link DGS-3130 User Manual - Page 325

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description  Selecting Local specifies to import local certificate and key pairs only. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specified entry. SSL Service Policy This window is used to display and configure the SSL service policy settings. To view the following window, click Security > SSL > SSL Service Policy, as shown below: Figure 9-95 SSL Service Policy Window The fields that can be configured are described below: Parameter Policy Name Session Cache Timeout Secure Trustpoint Cipher Suites Description Enter the SSL service policy name here. This name can be up to 32 characters long. Enter the session cache timeout value used here. This value must be between 60 and 86400 seconds. By default, this value is 600 seconds. Enter the secure trust point name here. This name can be up to 32 characters long. Select the cipher suites that will be associated with this profile here. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specified entry. SFTP Server Settings This window is used to display and configure the Secure File Transfer Protocol (SFTP) server settings. SFTP is a remotely secure file transfer protocol over a reliable data stream. Because SFTP itself does not provide authentication and security, the SFTP server runs as a sub-system of the SSH server. 315