D-Link DGS-3130 User Manual - Page 238

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 8-9 ACL Access List (Edit) Window After clicking the Edit button, the fields that can be configured are described below: Parameter Start Sequence No. Step Description Enter the start sequence number here. Enter the sequence number step here. The step range is from 1 to 32. This specifies the number that the sequence numbers step. The default value is 10. For example, if the increment (step) value is 5 and the beginning sequence number is 20, the subsequent sequence numbers are 25, 30, 35, 40, and so on. Click the Apply button to accept the changes made. After clicking the Add ACL button, the following page will appear. Figure 8-10 ACL Access List (Add ACL) Window After clicking the Add ACL button, the fields that can be configured are described below: Parameter ACL Type ID Description Select the ACL type that will be created here. Options to choose from are Standard IP ACL, Extended IP ACL, Standard IPv6 ACL, Extended IPv6 ACL, Extended MAC ACL, and Extended Expert ACL. Enter the ID for the ACL here.  For a Standard IP ACL, the range from 1 to 1999.  For an Extended IP ACL, the range from 2000 to 3999.  For a Standard IPv6 ACL, the range from 11000 to 12999.  For an Extended IPv6 ACL, the range from 13000 to 14999.  For an Extended MAC ACL, the range from 6000 to 7999.  For an Extended Expert ACL, the range from 8000 to 9999. ACL Name Enter the name of the ACL here. This name can be up to 32 characters long. 228