D-Link DGS-3130 User Manual - Page 162
Multicast VLAN
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Multicast VLAN Multicast VLAN Settings This window is used to display and configure the multicast VLAN settings. To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > Multicast VLAN Settings, as shown below: Figure 5-76 Multicast VLAN Settings Window The fields that can be configured in Multicast VLAN Global Settings are described below: Parameter Multicast VLAN IPv4 State Forward Unmatched Multicast VLAN IPv6 State Ignore VLAN VID VLAN Name Description Select to enable or disable the IPv4 IGMP control packet process in multicast VLANs. Select the enable or disable the Forward Unmatched feature here. This specifies that if the received IGMP or MLD control packet is untagged, does not match any profile, and the associated default VLAN is a multicast VLAN, or is tagged with a multicast VLAN, but does not match the associated profile, then the packet will be forwarded or dropped based on this setting. By default, the packet will be dropped. Select to enable or disable the IPv6 MLD control packet process in multicast VLANs. Select the enable or disable the ignore VLAN feature here. This specifies the setting for tagged IGMP or MLD control packets. If enabled, then the packet's VLAN is ignored and taken to match the profile to find its multicast VLAN. When this option is enabled, the Switch will ignore the VLAN of the receiving IGMP or MLD control packet and try to find a match profile. Enter the VLAN ID of the multicast VLAN that will be created or deleted here. The range is 2 to 4094. Enter the VLAN name of the multicast VLAN that will be created or deleted here. Click the Apply button to accept the changes made. 152