D-Link DGS-3130 User Manual - Page 34

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide 4. Management Command Logging User Accounts Settings Password Encryption Password Recovery Login Method SNMP RMON Telnet/Web Session Timeout DHCP DHCP Auto Configuration DNS IP Source Interface File System Stacking SMTP Settings Command Logging This window is used to display and configure the command logging function. The command logging function is used to log the commands that have successfully been configured on the Switch via the command line interface. The command, along with information about the user that entered the command, is included in the system log. Commands that do not cause a change in the Switch configuration or operation (such as 'show' commands) are not logged. To view the following window, click Management > Command Logging, as shown below: Figure 4-1 Command Logging Window The fields that can be configured are described below: Parameter Command Logging State Description Select to enable or disable the command logging function here. Click the Apply button to accept the changes made. User Accounts Settings On this page, user accounts can be created and updated. Active user account sessions can also be viewed on this page. There are several configuration options available in the Web User Interface (Web UI). The set of configuration options available to the user depends on the account's Privilege Level. NOTE: By default, there are no user accounts created on the Switch. To view the following window, click Management > User Accounts Settings, as shown below: 24