D-Link DGS-3130 User Manual - Page 82
DHCP Auto Configuration
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 4-62 DHCPv6 Local Relay VLAN Window The fields that can be configured are described below: Parameter DHCPv6 Local Relay VID List State Description Enter the DHCPv6 local relay VLAN ID(s) here. More than one VLAN ID can be entered here. Select the All VLANs option to apply this setting on all configured VLANs on this Switch. Select to enable or disable the DHCPv6 local relay feature on the specified VLAN(s) here. Click the Apply button to accept the changes made. NOTE: When the state of the DHCPv6 relay port is disabled, the port will not relay or locally relay received DHCPv6 packets. DHCP Auto Configuration This window is used to display and configure the DHCP auto-configuration function. To view the following window, click Management > DHCP Auto Configuration, as shown below: Figure 4-63 DHCP Auto Configuration Window The fields that can be configured are described below: Parameter Auto Configuration State Description Select this option to enable or disable the auto-configuration function. Click the Apply button to accept the changes made. DNS The Domain Name System (DNS) is used to map human-readable domain names to the IP addresses used by computers to communicate. A DNS server performs name-to-address translation, and may need to contact several name servers to translate a domain to an address. The address of the machine that supplies domain name service is often supplied by a DHCP or BOOTP server, or can be entered manually and configured into the operating system at startup. 72