D-Link DGS-3130 User Manual - Page 140

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description  The major ring instance and sub-ring instance of the interconnection node must have different R-APS VLAN IDs.  Manual switch or force switch command must not exist.  The physical ring must have only one instance. Click the Apply button to accept the changes made. The fields that can be configured in Ethernet Ring G.8032 are described below: Parameter Ring Name Description Enter the Ethernet Ring Protection (ERP) instance name here. This name can be up to 32 characters long. Click the Apply button to create an ITU-T G.8032 ERP physical ring. Click the Edit Ring button to modify an ITU-T G.8032 ERP physical ring. Click the Show Detail button to view the ITU-T G.8032 ERP physical ring status information. Click the Delete button to delete the specified ITU-T G.8032 ERP physical ring. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After click the Edit Ring button, the following window will appear. Figure 5-52 ERPS (Edit Ring) Window The fields that can be configured are described below: Parameter Instance ID Sub Ring Name Port0 Port1 Description Select the checkbox and enter the ERP instance number here. This value must be between 1 and 32. Select the Specify radio button to configure this parameter as normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and enter the physical ring's sub-ring name here. This name can be up to 32 characters long. Select the Specify radio button to configure this parameter as normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and then select the Switch unit ID and the port number that will be the first ring port of the physical ring. Select the Specify radio button to configure this parameter as normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and then select the Switch unit ID and the port number that will be the second ring port of the physical ring. Select the None option, from the drop-down menu, specifies that the inter-connected node is a local 130