D-Link DGS-3130 User Manual - Page 196

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide RIP Interface Settings This window is used to display and configure the RIP interface settings. To view the following window, click L3 Features > RIP > RIP Interface Settings, as shown below: Figure 6-29 RIP Interface Settings Window The fields that can be configured are described below: Parameter Network Passive Interface Description Enter the IPv4 network address used by RIP here. Interfaces that have a subnet belonging to the network specified here will be activated for RIP. Select to enable or disable the passive interface feature here. This feature is used to disable the sending and receiving of routing updates on an interface. However, RIP packets from other routers received on this interface will continue to be processed. Enter the name of the passive interface in the space provided. This name can be up to 12 characters long. Select the Default option to use this as the default for all interfaces. Click the Apply button to accept the changes made. Click the Delete button to delete an entry based on the information entered. RIP Database This window is used to display the Routing Information Protocol (RIP) routing database. Summary address entries will appear in the database only if relevant child routes exist and are being summarized. When the last child route for a summary address becomes invalid, the summary address is also removed from the routing table. To view the following window, click L3 Features > RIP > RIP Database, as shown below: Figure 6-30 RIP Database Window The fields that can be configured are described below: 186