D-Link DGS-3130 User Manual - Page 183
Apply, Show Detail, IPv6 MTU, IPv6 State, IPv6 Address Autoconfig, State, Default, Static IPv6
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Show Detail button to view and configure more detailed settings for the IPv6 interface entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Show Detail button, the following page will be available. Figure 6-11 IPv6 Interface (Detail, IPv6 Interface Settings) Window The fields that can be configured are described below: Parameter IPv6 MTU IPv6 State Description Enter the IPv6 MTU value here. The range is from 1280 to 65534 bytes. By default, this value is 1500 bytes. This parameter is used to configure the MTU to be advertised in RA messages. Select to enable or disable the IPv6 interface global state here. Click the Back button to discard the changes made and return to the previous page. Click the Apply button to accept the changes made. The fields that can be configured for IPv6 Address Autoconfig are described below: Parameter State Description Select to enable or disable the automatic configuration of the IPv6 address using stateless auto-configuration here. Select the Default option to specify that if the default router is selected on this interface, a default route will be installed using that default router. This option can only be specified on one interface. Click the Apply button to accept the changes made. The fields that can be configured for Static IPv6 Address Settings are described below: 173