D-Link DGS-3130 User Manual - Page 191

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv6 Route Table This window is used to display and configure the IPv6 route table. To view the following window, click L3 Features > IPv6 Route Table, as shown below: Figure 6-23 IPv6 Route Table Window The fields that can be configured are described below: Parameter IPv6 Address IPv6 Address/Prefix Length Interface Name Connected RIPng Database Summary Description Select and enter the IPv6 address to display here. Select and enter the IPv6 address and prefix length to display here. Select the Longer Prefixes option to display the route and all of the more specific routes. Select and enter the name of the interface to display here. Select this option to display only connected routes. Select this option to display only RIPng routes. Select this option to display all the related entries in the routing database instead of just the best route. Select this option to display a summary and count of the route sources configured on this Switch. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Route Preference This window is used to display and configure the route preference settings. Use this window to configure the distance, which represents the route's trust rating. The route with a lower distance value is preferred over the route with a higher distance value. A route with the distance 255 will not be installed for routing of packets since it indicates that the route is not trusted. To view the following window, click L3 Features > Route Preference, as shown below: 181