D-Link DGS-3130 User Manual - Page 172

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Maximum Frame Size Energy-Efficient Ethernet Description aggregation, and the aggregated port channel ID of the port. If the port is not aggregated, then the ID is 0. Select this option to enable or disable the Maximum Frame Size TLV to send. The Maximum Frame Size TLV indicates the maximum frame size capability of the implemented MAC and PHY. Select this option to enable or disable the Energy Efficient Ethernet TLV to send. The Energy Efficient Ethernet TLV indicates the reduce energy consumption capability of a link when no packets are being sent. Click the Apply button to accept the changes made. LLDP-MED Port Settings The LLDP-MED Port Settings page is used to enable or disable outbound LLDP advertisements for LLDP-MED TLVs. To view the following window, click L2 Features > LLDP > LLDP-MED Port Settings, as shown below: Figure 5-85 LLDP-MED Port Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Notification Capabilities Inventory Network Policy Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable transmitting the LLDP-MED notification TLV. Select this option to enable or disable transmitting the LLDP-MED capabilities TLV. Select this option to enable or disable transmitting the LLDP-MED inventory management TLV. Select this option to enable or disable transmitting the LLDP-MED network policy TLV. Click the Apply button to accept the changes made. LLDP Statistics Information This window is used to view the neighbor detection activity, LLDP Statistics and the settings for individual ports on the Switch. 162