D-Link DGS-3130 User Manual - Page 308

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Security > Network Access Authentication > Network Access Authentication Global Settings, as shown below: Figure 9-74 Network Access Authentication Global Settings Window The fields that can be configured in Network Access Authentication MAC Format Settings are described below: Parameter Case Delimiter Delimiter Number Description Select the case format that will be used for the network access authentication MAC address here. Options to choose from are Lowercase and Uppercase. Select the delimiter that will be used for the network access authentication MAC address here. Options to choose from are Hyphen, Colon, Dot, and None. Select the delimiter number option here. Options to choose from are 1, 2, and 5. Click the Apply button to accept the changes made. The fields that can be configured in General Settings are described below: Parameter Max Users Authorization State Description Enter the maximum amount of users allowed here. This value must be between 1 and 1000. By default, this option is 1000. Select to enable or disable the authorized state here. The option is used to enable or disable the acceptance of an authorized configuration. When authorization is enabled for authentication, the authorized attributes (for example VLAN, 802.1p default priority, bandwidth, and ACL) assigned by the RADIUS server will be accepted if the authorization status is enabled. Bandwidth and ACL are assigned on a per-port basis. If in the multiauthenticated mode, VLAN and 802.1p are assigned on a per-host basis. Otherwise, Bandwidth and ACL are assigned on a per-port basis. Click the Apply button to accept the changes made. The fields that can be configured in User Information are described below: Parameter User Name VID Description Enter the user name used here. This name can be up to 32 characters long. Enter the VLAN ID used here. 298