D-Link DGS-3130 User Manual - Page 203

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description  Peer Address - Specifies the BGP peer address as the next-hop.  Recursive - Specifies the IP address of the recursive as the next-hop router. Enter the recursive next-hop IP address in the space provided here. IP Precedence Metric Select the IP precedence option here. Options to choose from are Routine, Priority, Immediate, Flash, Flash Override, Critical, Internet, and Network. Use this feature to set the precedence value in the IP header. This option only takes effect when policy routing involves the IPv4 packet. Select and enter the metric value here that will be used in the modification. The range is from 0 to 4294967294. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Policy Route This window is used to display and configure the policy route settings. To view the following window, click L3 Features > Policy Route, as shown below: Figure 6-38 Policy Route Window Click the Edit button to modify the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Edit button, the following page will appear. Figure 6-39 Policy Route (Edit) Window The fields that can be configured are described below: Parameter Route Map Description Enter the route map name here that will be used in this policy route entry. Click the Apply button to accept the changes made. 193