D-Link DGS-3130 User Manual - Page 45

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Auth-Protocol by Password Description When selecting v3 in the SNMP Version drop-down list, and selecting Password in the SNMP V3 Encryption drop-down list, this option is available. Select the authentication level. Options to choose from are the following:  MD5 - Select to use the HMAC-MD5-96 authentication level. This field will require the user to enter a password or key.  SHA - Specify that the HMAC-SHA authentication protocol will be used. This field will require the user to enter a password or key. Password Priv-Protocol by Password Enter the Auth-Protocol password here. For MD5 this password must be between 8 and 16 characters long. For SHA this password must be between 8 and 20 characters long. When selecting v3 in the SNMP Version drop-down list, and selecting Password in the SNMP V3 Encryption drop-down list, this option is available. Select the private protocol. Options to choose from are the following:  None - Specify that no authorization protocol is in use.  DES56 - Specify that DES 56-bit encryption is in use, based on the CBCDES (DES-56) standard. This field will require the user to enter a password or a key. Password Auth-Protocol by Key Enter the Priv-Protocol password here. For none, this field will be disabled. For DES56 this password must be between 8 and 16 characters long. When selecting v3 in the SNMP Version drop-down list, and selecting Key in the SNMP V3 Encryption drop-down list, this option is available. Select the authentication level. Options to choose from are the following:  MD5 - Select to use the HMAC-MD5-96 authentication level. This field will require the user to enter a password or a key.  SHA - Specify that the HMAC-SHA authentication protocol will be used. This field will require the user to enter a password or a key. Key Priv-Protocol by Key Enter the Auth-Protocol key here. For MD5 this key must be 32 characters long. For SHA this key must be 40 characters long. When selecting v3 in the SNMP Version drop-down list, and selecting Key in the SNMP V3 Encryption drop-down list, this option is available. Select the private protocol. Options to choose from are the following:  None - Specify that no authorization protocol is in use.  DES56 - Specify that DES 56-bit encryption is in use, based on the CBCDES (DES-56) standard. This field will require the user to enter a password or a key. Key IP Address-List Name Enter the Priv-Protocol key here. For none, this field will be disabled. For DES56 this key must be 32 characters long. Enter the standard IP access control list (ACL) to associate with the user. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specified entry. SNMP Host Table Settings This window is used to display and configure the recipient of the SNMP notification. To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown below: 35