D-Link DGS-3130 User Manual - Page 138

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L2 Features > STP > STP Instance, as shown below: Figure 5-49 STP Instance Window The fields that can be configured are described below: Parameter Instance Priority Description After clicking the Edit button, enter the Instance Priority value here. The range is from 0 to 61440. Click the Edit button to re-configure the specific entry. Click the Apply button to accept the changes made. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MSTP Port Information This window is used to display and configure the MSTP port information settings. To view the following window, click L2 Features > STP > MSTP Port Information, as shown below: Figure 5-50 MSTP Port Information Window The fields that can be configured are described below: Parameter Unit Port Cost Priority Description Select the Switch unit that will be used for this display here. Select the port number that will be cleared here. After clicking the Edit button, enter the cost value here. This value must be between 1 and 200000000. After clicking the Edit button, select the priority value here. Options to choose from are 0 to 240. By default this option is 0. A lower value has higher priority. Click the Clear Detected Protocol button to clear the detected protocol settings for the port selected. 128