D-Link DGS-3130 User Manual - Page 130
Src-IP Address
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 5-45 VLAN Mapping Profile (Ethernet-IP, Add Rule) Window The fields that can be configured are described below: Parameter Rule ID Src-MAC Address Dst-MAC Address Priority Inner VID Ethernet Type Src-IP Address Dst-IP Address DSCP Source Port Destination Port IP Protocol Action Description Enter the VLAN mapping rule ID here. If not specified, the rule ID begins from 10 and is incremented by 10 for every new rule. The range is from 1 to 10000 Enter the source MAC address here. Enter the destination MAC address here. Select the 802.1p priority value here. The range is from 0 to 7. A lower value has a higher priority. Enter the inner VLAN ID here. The range is from 1 to 4094. Enter the Ethernet type value here. The range is from 0x0 to 0xFFFF. Enter the source IPv4 address and subnet mask here. Enter the destination IPv4 address and subnet mask here. Enter the DSCP value here. The range is from 0 to 63. Enter the source TCP/UDP port number here. The range is from 1 to 65535. Enter the destination TCP/UDP port number here. The range is from 1 to 65535. Enter the Layer 3 IP protocol value here. The range is from 0 to 255. Select the action that will be taken here. Options to choose from are Dot1qTunnel and Translate. Dot1q-Tunnel - Specifies that the outer-VID will be added for matched packets. Translate - Specifies that the outer-VID will replace the outer-VID of the matched packets. New Outer VID 802.1P Priority Enter the new outer VLAN ID here. The range is from 1 to 4094. Select the 802.1p priority value here. The range is from 0 to 7. A lower value has a higher priority. 120