D-Link DGS-3130 User Manual - Page 104

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 5-11 Protocol VLAN Profile Interface Window The fields that can be configured are described below: Parameter Port Profile ID VID Priority Description Select the stacking unit ID and the port number of the Switch that will be configured here. Select the 802.1v protocol VLAN profile ID here. Enter the VLAN ID used here. Select the priority value used here. This value is between 0 and 7. This parameter is specified to re-write the 802.1p default priority previously set in the Switch, which is used to determine the CoS queue that packets are forwarded to. Once this field is specified, packets accepted by the Switch that match this priority are forwarded to the CoS queue specified previously. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. GVRP GVRP Global This window is used to display and configure the global GARP VLAN Registration Protocol (GVRP) settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Global, as shown below: Figure 5-12 GVRP Global Window The fields that can be configured are described below: Parameter Global GVRP State Dynamic VLAN Creation NNI BPDU Address Description Select to enable or disable the global GVRP state here. Select to enable or disable the dynamic VLAN creation function here. Select the NNI BPDU address option here. This option is used to determine the BPDU protocol address for GVRP in customer networks. It can use 802.1d GVRP address or 802.1ad service provider GVRP address. Options to choose from are Dot1d and Dot1ad. Click the Apply button to accept the changes made. 94