D-Link DGS-3130 User Manual - Page 143

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter RPL Role Activate Sub Ring Instance Force Ring Port Block Manual Ring Port Block Description Select the checkbox and then select whether this node is the RPL owner or neighbor. Options to choose from are Owner and Neighbor. Select the Specify radio button to configure this parameter as normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and then select whether or not to active this ERP instance. Options to choose from are Enabled and Disabled. Enabling this option will active this ERP instance. Select the checkbox and enter the identifier of the ERP instance here. This is used to specify the sub-ring instance of a physical ring instance. The range is from 1 to 32. Select the Specify radio button to configure this parameter as normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and select the ERP instance port that will be blocked here. This forcibly blocks an instance port immediately after force is configured, irrespective of whether link failures have occurred. Options to choose from are Port0 and Port1. Select the checkbox and select the ERP instance port that will be blocked here. This forcibly blocks a port on which MS is configured when link failures and FS conditions are absent. Options to choose from are Port0 and Port1. Click the Back button to discard the changes made and return to the previous window. Click the Apply button to accept the changes made. Click the Clear button to clear the forced or manual configuration associated with this entry. ERPS Profile This window is used to display and configure the Ethernet Ring G.8032 Profile settings. To view the following window, click L2 Features > ERPS (G.8032) > ERPS Profile, as shown below: Figure 5-56 ERPS Profile Window The fields that can be configured are described below: Parameter Profile Name Description Enter the G.8032 profile name here. This name can be up to 32 characters long. Multiple ERP instances can be associated with the same G.8032 profile. The instances associated with the same profile protect the same set of VLANs, or the VLANs protected by one instance are a subset of LANs protected by another instance. Click the Apply button to associate the G.8032 profile with the ERP instance created. Click the Edit button to modify the specified G.8032 profile. Click the Delete button to disassociate the G.8032 profile. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 133