D-Link DGS-3130 User Manual - Page 333

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 10-5 Ethernet OAM Statistics Table Window The fields that can be configured are described below: Parameter Unit From Port - To Port Action Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Select the Find option to find and display the statistics information associated with the specified port. Select the Clear option to clear the statistics information associated with the specified port(s). Click the Find button to find and display the statistics information associated with the specified port(s). Click the Show All button to display all the statistics information. DDM This folder contains windows that perform Digital Diagnostic Monitoring (DDM) functions on the Switch. There are windows that allow the user to view the digital diagnostic monitoring status of SFP/SFP+ modules inserting to the Switch and to configure alarm settings, warning settings, temperature threshold settings, voltage threshold settings, bias current threshold settings, Tx power threshold settings, and Rx power threshold settings. DDM Settings The window is used to view and configure the action that will occur for specific ports when an exceeding alarm threshold or warning threshold event is encountered. To view the following window, click OAM > DDM > DDM Settings, as shown below: 323