D-Link DGS-3130 User Manual - Page 275

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Authentication Port Accounting Port Retransmit Timeout Key Type Key Description Enter the authentication port number used here. This value must be between 0 and 65535. By default, this value is 1812. If no authentication is used, use the value 0. Enter the accounting port number used here. This value must be between 0 and 65535. By default, this value is 1813. If no accounting is used, use the value 0. Enter the retransmit value used here. This value must be between 0 and 20. By default, this value is 3. To disable this option, enter the value 0. Enter the timeout value used here. This value must be between 1 and 255 seconds. By default, this value is 5 seconds. Select the key type that will be used here. Options to choose from are Plain Text and Encrypted. Enter the key, used to communicate with the RADIUS server, here. This key can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. RADIUS Group Server Settings This window is used to display and configure the RADIUS group server settings. To view the following window, click Security > RADIUS > RADIUS Group Server Settings, as shown below: Figure 9-31 RADIUS Group Server Settings Window The fields that can be configured are described below: Parameter Group Server Name IP Address IPv6 Address Description Enter the RADIUS group server name here. This name can be up to 32 characters long. Enter the group server IPv4 address here. Enter the group server IPv6 address here. Click the Add button to add a new entry based on the information entered. Click the Show Detail button to view and configure more detailed settings for the RADIUS group server. Click the Delete button to remove the specified entry. After clicking the Show Detail button, the following page will be available. 265