D-Link DGS-3130 User Manual - Page 235

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Source Destination Source Port Destination Port Specify ICMP Message Type Description Select and enter the source information here. Options to choose from are Any, Host, and IPv6.  When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule.  When the Host option is selected, enter the source host IPv6 address here.  When the IPv6 option is selected, the Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are Any, Host, and IPv6.  When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule.  When the Host option is selected, enter the destination host IPv6 address here.  When the IPv6 option is selected, the Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select and enter the source port value here. Options to choose from are and Range.  When selecting the = option, the specific selected port number will be used.  When selecting the > option, all ports greater than the selected port, will be used.  When selecting the < option, all ports smaller than the selected port, will be used.  When selecting the ≠ option, all ports, excluding the selected port, will be used.  When selecting the Range option, the start port number and end port number selected, of the range, will be used. Alternatively, the port number(s) can manually be entered in the space(s) provided, if the port number(s) is/are not available in the drop-down list. This parameter is only available in the protocol type TCP and UDP. Select and enter the destination port value here. Options to choose from are and Range.  When selecting the = option, the specific selected port number will be used.  When selecting the > option, all ports greater than the selected port, will be used.  When selecting the < option, all ports smaller than the selected port, will be used.  When selecting the ≠ option, all ports, excluding the selected port, will be used.  When selecting the Range option, the start port number and end port number selected, of the range, will be used. Alternatively, the port number(s) can manually be entered in the space(s) provided, if the port number(s) is/are not available in the drop-down list. This parameter is only available in the protocol type TCP and UDP. Select the ICMP message type used here. This parameter is only available in the protocol type ICMP. 225