D-Link DGS-3130 User Manual - Page 315
Trusted Host, Traffic Segmentation Settings
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 315 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Rate Limit Description Enter the rate limit value used here. This value must be between 0 and 1024 packets per second. Tick the No Limit option to disable the rate limit. Click the Apply button to accept the changes made. The fields that can be configured in Protect Type Information are described below: Parameter Protocol Name Description Select the protocol name option here. Click the Find button to locate a specific entry based on the information entered. Trusted Host This window is used to display and configure the trusted host settings. To view the following window, click Security > Trusted Host, as shown below: Figure 9-81 Trusted Host Window The fields that can be configured are described below: Parameter ACL Name Type Description Enter the access class' name here. This name can be up to 32 characters long. Select the trusted host type here. Options to choose from are Telnet, SSH, Ping, HTTP, and HTTPS. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Traffic Segmentation Settings This window is used to display and configure the traffic segmentation settings. When the traffic segmentation forwarding domain is specified, packets received by the port will be restricted in Layer 2 packet forwarding to interfaces within the domain. When the forwarding domain of a port is empty, Layer 2 forwarding for packets received by the port is not restricted. The traffic segmentation member list can be comprised of different interface types, for example port and port-channel in the same forwarding domain. If the interfaces specified by the command include a port-channel, all the member ports of this port-channel will be included in the forwarding domain. If the forwarding domain of an interface is empty, then there is no restriction on Layer 2 forwarding of packets received by the port. To view the following window, click Security > Traffic Segmentation Settings, as shown below: 305