D-Link DGS-3130 User Manual - Page 171
LLDP Dot3 TLVs Settings
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Unit From Port - To Port Port VLAN Protocol VLAN VLAN Name Protocol Identity Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable sending the port VLAN ID TLV. The Port VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to advertise the port VLAN ID (PVID) that will be associated with untagged or priority tagged frames. Select this option to enable or disable sending the Port and Protocol VLAN ID (PPVID) TLV. Enter the VLAN ID in PPVID TLV. Select this option to enable or disable sending the VLAN name TLV. Enter the ID of the VLAN in the VLAN name TLV. Select this option to enable or disable sending the Protocol Identity TLV and the protocol name. Options for protocol name to choose from are None, EAPOL, LACP, GVRP, STP, and All. Click the Apply button to accept the changes made. LLDP Dot3 TLVs Settings The LLDP Dot3 TLVs Settings page is used to enable or disable outbound LLDP advertisements for IEEE 802.3 organizationally unique TLVs. To view the following window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings, as shown below: Figure 5-84 LLDP Dot3 TLVs Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port MAC/PHY Configuration/Status Link Aggregation Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the MAC/PHY Configuration/Status TLV to send. The MAC/PHY Configuration/Status TLV is an optional TLV that identifies (1) the duplex and bit-rate capability of the sending IEEE 802.3 LAN node, and (2) the current duplex and bit-rate settings of the sending IEEE 802.3 LAN node. Select this option to enable or disable the Link Aggregation TLV to send. The Link Aggregation TLV indicates contains the following information. Whether the link is capable of being aggregated, whether the link is currently in an 161