D-Link DGS-3130 User Manual - Page 18

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 3-3 Peripheral Settings Window The fields that can be configured in Environment Trap Settings are described below: Parameter Fan Trap Power Trap Temperature Trap Description Select to enable or disable the fan trap state for waning fan event (fan failed or fan recover). Select to enable or disable the power trap state for waning power event (power failed or power recover). Select to enable or disable the temperature trap state for warning temperature event (temperature thresholds exceeded or temperature recover). Click the Apply button to accept the changes made. The fields that can be configured in Environment Temperature Threshold Settings are described below: Parameter Unit Thermal High Threshold Low Threshold Description Select the Switch unit that will be used for this configuration here. Select the thermal sensor ID. Enter the high threshold value of the warning temperature setting. The range is from -100 to 200 degrees Celsius. Tick the Default check box to return to the default value. Enter the low threshold value of the warning temperature setting. The range is from -100 to 200 degrees Celsius. Tick the Default check box to return to the default value. Click the Apply button to accept the changes made. Port Configuration Port Settings This window is used to display and configure the Switch's port settings. NOTE: The 10M and 100M speed options are only applicable when connecting to the Management Port (Mgmt 0). To view the following window, click System > Port Configuration > Port Settings, as shown below: 8