D-Link DGS-3130 User Manual - Page 368
Auto-save
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 368 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Log Description Log Message: RADIUS server assigned bandwidth: to port (Username: ) Parameters description: server-ip: It indicates the RADIUS server IP address. direction: It indicates the direction for bandwidth control, e.g.: ingress or egress. threshold: The assign threshold of bandwidth that authorized by from RADIUS server. interface-id: It indicates the port number of the client authenticated. username: It indicates the username for authentication. Severity Event description: RADIUS assigned a valid priority attributes. Log Message: RADIUS server assigned 802.1p default priority: to port (Username: ) Parameters description: server-ip: It indicates the RADIUS server IP address. priority: The assign priority that authorized by from RADIUS server. interface-id: It indicates the port number of the client authenticated. username: It indicates the username for authentication. Informational Event description: RADIUS assigned ACL script but fails to apply to the system due to insufficient resource. Log Message: RADIUS server assigns ACL failure at port () Parameters description: server-ip: It indicates the RADIUS server IP address. username: It indicates the username for authentication. interface-id: It indicates the port number of the client authenticated. acl-script: The assign ACL script that authorized by from RADIUS server. Warning ARP Log Description Event description: Gratuitous ARP detected duplicate IP. Log Message: Conflict IP was detected with this device (IP: , MAC: , Port , Interface: ). Parameters description: ipaddr: The IP address which is duplicated with our device. macaddr: The MAC address of the device that has duplicated IP address as our device. unitID: 1.Interger value;2.Represent the id of the device in the stacking system. portNum: 1.Interger value;2.Represent the logic port number of the device. ipif_name: The name of the interface of the Switch which has the conflict IP address. Severity Warning Auto-save Log Description Event description: Record the event when the configure information of DDP is saved automatically. Log Message:CONFIG-6-DDPSAVECONFIG: [Unit , ]Configuration automatically saved to flash due to configuring from DDP(Username: , IP: ) Parameters description: Unit: Box ID Severity Informational 358