D-Link DGS-3130 User Manual - Page 190

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 6-21 IPv4 Route Table Window The fields that can be configured are described below: Parameter IP Address Network Address RIP Connected Summary Description Select and enter the single IPv4 address here. Select and enter the IPv4 network address here. In the first space enter the network prefix and in the second space enter the network mask. Select this option to display only RIP routes. Select this option to display only connected routes. Select this option to display a summary and count of the route sources configured on this Switch. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv6 Static/Default Route This window is used to display and configure the IPv6 static or default routes. To view the following window, click L3 Features > IPv6 Static/Default Route, as shown below: Figure 6-22 IPv6 Static/Default Route Window The fields that can be configured are described below: Parameter IPv6 Address/Prefix Length Interface Name Next Hop IPv6 Address Distance Description Enter the IPv6 address and prefix length for this route here. Tick the Default Route option to use this route as the default route. Enter the name of the interface that will be associated with this route here. Enter the next hop IPv6 address here. Enter the administrative distance of the static route here. This value must be between 1 and 254. A lower value represents a better route. If not specified, the default administrative distance for a static route is 1. Click the Apply button to accept the changes made. 180