D-Link DGS-3130 User Manual - Page 252

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Sequence No. ACL Name Description Enter the sequence number of the associated match entry here. The range is from 1 to 65535. The lower the number is, the higher the priority of the access list. Enter the standard or extended IP access list name to be matched here. This name can be up to 32 characters long. Alternatively, click the Please Select button to select an existing ACL from the list. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. The fields that can be configured in Match IPv6 Access List are described below: Parameter Sequence No. ACL Name Description Enter the sequence number of the associated match entry here. The range is from 1 to 65535. The lower the number is, the higher the priority of the access list. Enter the standard or extended IPv6 access list name to be matched here. This name can be up to 32 characters long. Alternatively, click the Please Select button to select an existing ACL from the list. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. The fields that can be configured in Match MAC Access List are described below: Parameter Sequence No. ACL Name Description Enter the sequence number of the associated match entry here. The range is from 1 to 65535. The lower the number is, the higher the priority of the access list. Enter the extended MAC access list name to be matched here. This name can be up to 32 characters long. Alternatively, click the Please Select button to select an existing ACL from the list. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. The fields that can be configured in Match Ingress Interface are described below: Parameter Unit From Port - To Port Description Select the Switch unit ID that will be used here. Select the Switch port range that will be used here. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry. After clicking the Please Select button, the following window will appear: 242