D-Link DGS-3130 User Manual - Page 361

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Source IPv6 Address Description Enter the source IPv6 address. If the current Switch has more than one IPv6 address, you can enter one of them to this field. When entered, this IPv6 address will be used as the packets' source IP address sent to the remote host, or as primary IP address. Click the Start button to initiate the Ping Test for each individual section. After clicking the Please Select button, the following window will appear: Figure 13-13 Ping (Please Select) Window Select the radio button next to the entry to use that ACL in the configuration. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Click the OK button to accept the selection made. After clicking the Start button in IPv4 Ping section, the following IPv4 Ping Result section will appear: Figure 13-14 Ping (Start) Window Click the Stop button to halt the Ping Test. Click the Back button to return to the IPv4 Ping section. Trace Route The trace route page allows the user to trace a route between the Switch and a given host on the network. To view the following window, click Tools > Trace Route, as shown below: 351