D-Link DGS-3130 User Manual - Page 63
DHCPv6 Server Local Pool Settings
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter IAID Valid Lifetime Preferred Lifetime Description Enter the Identity Association Identifier (IAID) here. The IAID here uniquely identifies a collection of non-temporary addresses (IANA) assigned on the client. Enter the valid lifetime value here. The valid lifetime should be greater than the preferred lifetime. The range is from 60 to 4294967295 seconds. By default, this value is 2592000 seconds (30 days). Enter the preferred lifetime value here. The range is from 60 to 4294967295 seconds. By default, this value is 604800 seconds (7 days). Click the Apply button to accept the changes made. DHCPv6 Server Local Pool Settings This window is used to display and configure the DHCPv6 server local pool settings. To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Local Pool Settings, as shown below: Figure 4-40 DHCPv6 Server Local Pool Settings Window The fields that can be configured are described below: Parameter Pool Name IPv6 Address / Prefix Length Assigned Length Description Enter the DHCPv6 server pool name here. This name can be up to 12 characters long. Enter the IPv6 prefix address and prefix length of the local pool here. Enter the prefix length to be delegated to the user from the pool here. The value of the assigned length cannot be less than the value of the prefix length. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the User Detail button to view the user information displayed in the lower table. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 53