D-Link DGS-3130 User Manual - Page 169

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter IP Subtype Action Address Description Select the type of the IP address information to be sent. Options to choose from are Default, IPv4 and IPv6. Select the action that will be taken here. Options to choose from are Remove and Add. Enter the IP address that will be sent. Click the Apply button to accept the changes made. NOTE: The IPv4 or IPv6 address entered here should be an existing LLDP management IP address. LLDP Management Address List This window is used to view the LLDP management address list. To view the following window, click L2 Features > LLDP > LLDP Management Address List, as shown below: Figure 5-81 LLDP Management Address List Window The fields that can be configured are described below: Parameter Subtype Description Select the subtype. Options to choose from are All, IPv4 and IPv6. After selecting the IPv4 option, enter the IPv4 address in the space provided. After selecting the IPv6 option, enter the IPv6 address in the space provided. Click the Find button to locate a specific entry based on the selection made. LLDP Basic TLVs Settings The Type-Length-Value (TLV) field allows specific information to be sent within LLDP packets. This window is used to configure basic TLV settings. An active LLDP port on the Switch always includes mandatory data in its outbound advertisements. There are four optional data types that can be configured to exclude one or more of these data types from outbound LLDP advertisements. The mandatory data type includes four basic types of TLVs: end of LLDPDU TLV, chassis ID TLV, port ID TLV, and TTL TLV. The mandatory data types cannot be disabled. There are also four data types which can be optionally selected. These include: Port Description, System Name, System Description and System Capability. To view the following window, click L2 Features > LLDP > LLDP Basic TLVs Settings, as shown below: 159