D-Link DGS-3130 User Manual - Page 355

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Unit Source File Description Select the Switch unit that will be used for this configuration here. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Firmware Backup to TFTP This window is used to initiate a firmware backup to a TFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP, as shown below: Figure 13-5 Firmware Backup to TFTP Window The fields that can be configured are described below: Parameter Unit TFTP Server IP VRF Name Source File Destination File Description Select the Switch unit that will be used for this configuration here. Enter the TFTP server IP address here. When select the IPv4 option, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the name of the VRF instance here. This name can be up to 12 characters long. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Enter the destination filename and path of the firmware file to be backed up to the TFTP server here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: 345