D-Link DGS-3130 User Manual - Page 242

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter TCP Flag IP Precedence Description This parameter is only available in the protocol type ICMP. Tick the appropriate TCP flag option to include the flag in this rule. Options to choose from are ack, fin, psh, rst, syn, and urg. This parameter is only available in the protocol type TCP. Select the IP precedence value used here. Options to choose from are routine (0), priority (1), immediate (2), flash (3), flash-override (4), critical (5), internet (6), and network (7).  Value - The IP precedence value can also manually be entered here. The range is from 0 to 7. ToS Select the Type-of-Service (ToS) value that will be used here. Options to choose from are normal (0), min-monetary-cost (1), max-reliability (2), max- throughput (4), and min-delay (8).  Value - The ToS value can also manually be entered here. The range is from 0 to 15. DSCP Select the DSCP value that will be used here. Options to choose from are default (0), af11 (10), af12 (12), af13 (14), af21 (18), af22 (20), af23 (22), af31 (26), af32 (28), af33 (30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3 (24), cs4 (32), cs5 (40), cs6 (48), cs7 (56), and ef (46).  Value - The DSCP value can also manually be entered here. The range is from 0 to 63. Time Range Enter the name of the time range profile that will be used in this ACL rule here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. Standard IPv6 ACL After selecting a Standard IPv6 ACL and clicking the Add Rule button, the following page will appear. Figure 8-13 Standard IPv6 ACL (Add Rule) Window The fields that can be configured are described below: 232