D-Link DGS-3130 User Manual - Page 197

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Network Address Description Enter the subnet prefix and the prefix length of the network(s) to be displayed here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the entries. RIPng RIPng Settings This window is used to display and configure the Routing Information Protocol Next Generation (RIPng) settings, also known as IPv6 RIP. To view the following window, click L3 Features > RIPng > RIPng Settings, as shown below: Figure 6-31 RIPng Settings Window The fields that can be configured in RIPng Global Settings are described below: Parameter Global State Description Select to globally enable or disable the RIPng feature here. Click the Apply button to accept the changes made. The fields that can be configured in RIPng Settings are described below: Parameter Default Metric Distance Description Enter the default metric value here. The range is from 1 to 16. This value is used to specify the default metric for routes redistributed from other routing protocols. If the routes being redistributed are learned from other protocols, then they have an incompatible metric with IPv6 RIP. Re-specifying of metric allows the metric to be synced. Select the Default option to use the default metric value, which is 1. Enter the administrative distance for RIPng here. The range is from 1 to 254. The distance value represents the trust rating of the route. The route with a lower distance value is preferred over the route with the higher distance value. 187