D-Link DGS-3130 User Manual - Page 247

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description  When the Host option is selected, enter the source host MAC address here.  When the MAC option is selected, the Wildcard option will also be available. Enter the source MAC address and wildcard value in the spaces provided. Destination Select and enter the destination MAC address information here. Options to choose from are Any, Host, MAC, and Wildcard.  When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule.  When the Host option is selected, enter the destination host MAC address here.  When the MAC option is selected, the Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided. Specify Ethernet Type Ethernet Type Ethernet Type Mask CoS Inner CoS VID Inner VID Time Range Select the Ethernet type option here. Options to choose from are aarp, appletalk, decent-iv, etype-6000, etype-8042, lat, lavc-sca, mop-console, mop-dump, vines-echo, vines-ip, xns-idp, and arp. Enter the Ethernet type hexadecimal value here. This value must be between 0x600 and 0xFFFF. When the Ethernet type profile is selected, above, the appropriate hexadecimal value will automatically be entered. Enter the Ethernet type mask hexadecimal value here. This value must be between 0x0 and 0xFFFF. When the Ethernet type profile is selected, above, the appropriate hexadecimal value will automatically be entered. Select the CoS value that will be used here. The range is from 0 to 7. After selecting the CoS value, select the inner CoS value that will be used here. The range is from 0 to 7. Enter the VLAN ID that will be associated with this ACL rule here. The range is from 1 to 4094. Enter the inner VLAN ID that will be associated with this ACL rule here. The range is from 1 to 4094. Enter the name of the time range profile that will be used in this ACL rule here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. ACL Interface Access Group This window is used to display and configure the ACL interface access group settings. To view the following window, click ACL > ACL Interface Access Group, as shown below: 237