D-Link DGS-3130 User Manual - Page 96

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Subject Content Description Enter the subject of the email here. This string can be up to 128 characters long. Enter the content of the email here. This string can be up to 512 characters long. Click the Apply button to accept the changes made. Click the Delete All button to delete all the entries found in the display table. Click the Delete button to delete the specified entry. PPPoE Circuit ID Insertion Global Settings This window is used to display and configure the PPPoE Circuit ID Insertion Global Settings. To view the following window, click Management > PPPoE Circuit ID Insertion Global Settings, as shown below: Figure 4-76 PPPoE Circuit ID Insertion Global Settings Window The fields that can be configured in PPPoE Circuit ID Insertion Global Settings are described below: Parameter Global PPPoE State Description Select this option to enable or disable the PPPoE Circuit ID Insertion on the Switch. Select Disabled to disable PPPoE Circuit ID Insertion on the Switch. Click the Apply button to accept the changes made. The fields that can be configured in PPPoE Circuit ID Insertion Port Settings are described below: Parameter Unit From Port - To Port State Circuit ID Type Description Select the stacking unit ID of the Switch that will be configured here. Select the range of ports that will be used for this configuration here. Select to enable or disable the PPPoE Circuit ID Insertion Port state here. Specifies that the IP, MAC, or expert UDF format will be used. Click the Apply button to accept the changes made. . 86