D-Link DGS-3130 User Manual - Page 97

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide 5. Layer 2 Features FDB VLAN VLAN Tunnel STP ERPS (G.8032) Loopback Detection Link Aggregation L2 Protocol Tunnel L2 Multicast Control LLDP FDB Static FDB Unicast Static FDB This window is used to display and configure the static unicast forwarding settings on the Switch. To view the following window, click L2 Features > FDB > Static FDB > Unicast Static FDB, as shown below: Figure 5-1 Unicast Static FDB Window The fields that can be configured are described below: Parameter Port/Drop Unit Port Number VID MAC Address Description Allows the selection of the port number on which the MAC address entered resides. This option could also drop the MAC address from the unicast static FDB. Select the port number when selecting the Port. Select the stacking unit ID of the Switch that will be configured here. After selecting the Port option, select the port number used here. Enter the VLAN ID on which the associated unicast MAC address resides. Enter the MAC address to which packets will be statically forwarded. This must be a unicast MAC address. Click the Apply button to accept the changes made. Click the Delete All button to delete all the entries found in the display table. Click the Delete button to delete the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 87