D-Link DGS-3130 User Manual - Page 278

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter IP Address Port Timeout Key Type Key Description Enter the TACACS+ server IPv4 address here. Enter the port number used here. This value must be between 1 and 65535. By default, this value is 49. Enter the timeout value here. This value must be between 1 and 255 seconds. By default, this value is 5 seconds. Select the key type that will be used here. Options to choose from are Plain Text and Encrypted. Enter the key, used to communicate with the TACACS+ server, here. This key can be up to 254 characters long. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. TACACS Group Server Settings This window is used to display and configure the TACACS+ group server settings. To view the following window, click Security > TACACS > TACACS Group Server Settings, as shown below: Figure 9-36 TACACS Group Server Settings Window The fields that can be configured are described below: Parameter Group Server Name IPv4 TACACS Server IP Description Enter the TACACS+ group server name here. This name can be up to 32 characters long. Enter the group server IPv4 address here. Click the Add button to add a new entry based on the information entered. Click the Show Detail button to view and configure more detailed settings for the TACACS+ group server. Click the Delete button to remove the specified entry. After clicking the Show Detail button, the following page will be available. 268