D-Link DGS-3130 User Manual - Page 202

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Interface Name IP Address ACL IP Next Hop ACL Route Source Metric Description Select and enter the interface name that will be used here. This option is used to define a clause to match the route's outgoing interface. Select and enter the standard or extended IP access list name here. This option is used to define a clause to match the route based on the standard or extended IP access list. This string can be up to 32 characters long. Select and enter the standard IP access list name here. This option is used to define a clause to match the route's next hop based on the standard IP access list. This string can be up to 32 characters long. Select and enter the standard or extended IP/IPv6 access list name here. This option is used to define a clause to match the route's source based on the standard or extended IP/IPv6 access list. This string can be up to 32 characters long. Select and enter the metric value of the route here. The range is from 0 to 4294967294. This option is used to define a clause to match the route metric. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. After clicking the Edit button in the Set Clauses column, the following page will appear. Figure 6-37 Route Map (Set Clauses, Edit) Window The fields that can be configured are described below: Parameter Action IP Default Next Hop IP Next Hop Description Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Enter the default next-hop IP addresses in the spaces provided that will be used to route the packet. This feature can be used to specify multiple default next hop routers. If default next hops are already configured, the default next hops configured later will be added to the default next hop list. When the first default next hop router specified is down, the next default next hop router specified is tried in turn to route the packet. Up to 8 default next-hop IP addresses can be entered. Select the IP next hop type here. This feature is used to configure the next-hop router to route the packet that passes the match clauses of the configured route map sequence. Options to choose from are IP Address, Peer Address, and Recursive.  IP Address - Specifies the IP addresses of the next-hops to route the packet. Enter the next-hop IP addresses in the spaces provided here. Up to 8 next-hop IP addresses can be entered. 192