D-Link DGS-3130 User Manual - Page 64

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide DHCPv6 Server Exclude Address This window is used to specify IPv6 addresses that a DHCPv6 server should not assign to DHCPv6 clients. The DHCPv6 server assumes that all addresses (excluding the Switch's IPv6 address) can be assigned to clients. Use this window to exclude a single IPv6 address or a range of IPv6 addresses. The excluded addresses are only applied to the pool(s) for address assignment. To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Exclude Address, as shown below: Figure 4-41 DHCPv6 Server Exclude Address Window The fields that can be configured are described below: Parameter Low IPv6 Address High IPv6 Address Description Enter the excluded IPv6 address or first IPv6 address in the excluded address range here. Enter the last IPv6 address in the excluded address range here (optional). Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. DHCPv6 Server Binding This window is used to view and clear the DHCPv6 server binding entries. To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Binding, as shown below: Figure 4-42 DHCPv6 Server Binding Window The fields that can be configured are described below: Parameter IPv6 Address Description Enter the binding entry IPv6 address to be displayed or cleared here. Select the All option to display or clear all DHCPv6 client prefix bindings in or from the binding table. Click the Find button to locate a specific entry based on the information entered. Click the Clear button to clear the entries based on the information specified. 54