D-Link DGS-3130 User Manual - Page 236

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter ICMP Message Type Message Code DSCP Description When the ICMP Message Type is not selected, enter the ICMP Message Type numerical value used here. The range is from 0 to 255. When the ICMP Message Type is selected, this numerical value will automatically be entered. This parameter is only available in the protocol type ICMP. When the ICMP Message Type is not selected, enter the Message Code numerical value used here. The range is from 0 to 255. When the ICMP Message Type is selected, this numerical value will automatically be entered. This parameter is only available in the protocol type ICMP. Select the DSCP value that will be used here. Options to choose from are default (0), af11 (10), af12 (12), af13 (14), af21 (18), af22 (20), af23 (22), af31 (26), af32 (28), af33 (30), af41 (34), af42 (36), af43 (38), cs1 (8), cs2 (16), cs3 (24), cs4 (32), cs5 (40), cs6 (48), cs7 (56), and ef (46).  Value - The DSCP value can also manually be entered here. The range is from 0 to 63. Traffic Class TCP Flag Flow Label Time Range Action Select and enter the traffic class value here. The range is from 0 to 255. Tick the appropriate TCP flag option to include the flag in this rule. Options to choose from are ack, fin, psh, rst, syn, and urg. This parameter is only available in the protocol type TCP. Enter the flow label value here. This value must be between 0 and 1048575. Enter the name of the time range profile that will be used in this ACL rule here. This name can be up to 32 characters long. Select the action that this rule will take here. Options to choose from are Permit, Deny and Deny CPU. Click the Back button to return to the previous step. Click the Next button to continue to the next step. Step 4 - Apply Port After clicking the Next button, the following window will appear. Figure 8-7 ACL Configuration Wizard (Create, Port) Window The fields that can be configured are described below: Parameter Unit From Port - To Port Direction Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select the direction here. Options to choose from are In and Out. Click the Back button to return to the previous step. Click the Apply button to accept the changes made and return to the main ACL Wizard window. 226