D-Link DGS-3130 User Manual - Page 239

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Click the Apply button to accept the changes made. Standard IP ACL After selecting a Standard IP ACL and clicking the Add Rule button, the following page will appear. Figure 8-11 Standard IP ACL (Add Rule) Window The fields that can be configured are described below: Parameter Sequence No. Action Source Description Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If this value is not specified, the system will automatically generate an ACL rule number for this entry. Select the action that this rule will take here. Options to choose from are Permit, Deny, and Deny CPU. Select and enter the source information here. Options to choose from are Any, Host, IP, and Wildcard.  When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule.  When the Host option is selected, enter the source host IP address here.  When the IP option is selected, the Wildcard option will also be available. Enter the group of source IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. Destination Select and enter the destination information here. Options to choose from are Any, Host, IP, and Wildcard.  When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule.  When the Host option is selected, enter the destination host IP address here.  When the IP option is selected, the Wildcard option will also be available. Enter the group of destination IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. Time Range Enter the name of the time range profile that will be used in this ACL rule here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. 229