Dell PowerEdge 2970 Hardware Owner's Manual - Page 110
Installing the Control Panel Assembly, Affix the display module label to the display module.
View all Dell PowerEdge 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Figure 3-34. Control Panel Removal 4 3 2 1 5 6 7 1 display module label 4 display module cable 7 control-panel circuit board securing screws (3) 2 display module securing screws (2) 5 control panel cable 3 display module 6 control panel circuit board Installing the Control Panel Assembly 1 Insert the display module into the chassis cutout and secure with the two Torx screws. 2 Affix the display module label to the display module. 3 Install the control panel board in the system chassis and secure with the three Phillips screws. See Figure 3-34. 4 Connect the display module cable to the control panel board. See Figure 3-34. 5 Connect the control panel cable to the control panel board. See Figure 3-34. 6 Close the system. See "Closing the System" on page 56. 110 Installing System Components