Dell PowerEdge 2970 Hardware Owner's Manual - Page 71
Reinstall the SAS controller card. See Installing a SAS Controller Daughter Card
View all Dell PowerEdge 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
6 Holding the sideplane in place, locate the USB connector on the sideplane (see Figure 6-4) and install the USB memory key onto the board. See Figure 3-13. 7 Replace the sideplane into the system. 8 Reconnect the optical drive cable, if present. 9 Reinstall the SAS controller card. See "Installing a SAS Controller Daughter Card" on page 65. 10 Close the system. See "Closing the System" on page 56. Figure 3-13. Installing an Internal USB Key 3 2 4 1 1 internal USB connector 4 sideplane 2 USB memory key 3 sideplane latch Installing System Components 71
Installing System Components
71
6
Holding the sideplane in place, locate the USB connector on the sideplane (see Figure 6-4) and install
the USB memory key onto the board. See Figure 3-13.
7
Replace the sideplane into the system.
8
Reconnect the optical drive cable, if present.
9
Reinstall the SAS controller card. See "Installing a SAS Controller Daughter Card" on page 65.
10
Close the system. See "Closing the System" on page 56.
Figure 3-13.
Installing an Internal USB Key
1
internal USB connector
2
USB memory key
3
sideplane latch
4
sideplane
1
2
4
3