Dell PowerEdge 2970 Hardware Owner's Manual - Page 66
connector 0 on the SAS controller and the other end to the SAS_A backplane connector. See
View all Dell PowerEdge 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Figure 3-9. Installing a SAS Controller Daughter Card 3 2 1 4 5 6 7 8 1 SAS controller daughter card 2 4 release tab 5 7 SAS cable (1 or 2) 8 sideplane 3 SAS controller daughter card 6 battery connector (SAS RAID only) SAS RAID controller DIMM (SAS RAID only) SAS controller daughter card socket SAS connector(s) (1 or 2) 5 Attach the interface cable(s) to the SAS controller daughter card and to the backplane. • For a non-RAID SAS controller (with a single connector), attach one end of the interface cable to connector 0 on the SAS controller and the other end to the SAS_A backplane connector. See Figure 3-10. • For a SAS RAID controller (with dual connectors), attach the first interface cable to connector 0 on the SAS RAID controller and to the SAS_A connector on the backplane. Attach the second interface cable to connector 1 on the SAS RAID controller and to the SAS_B connector on the backplane. See Figure 3-11. 66 Installing System Components