Dell PowerEdge 2970 Hardware Owner's Manual - Page 78
Disconnect all expansion-card cables.
View all Dell PowerEdge 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
NOTE: You must remove all expansion cards from the expansion-card cage before removing the expansion-card cage from the system. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 55. 3 Disconnect all expansion-card cables. 4 Remove any expansion cards from the expansion-card cage. See "Removing an Expansion Card" on page 74. 5 Press the two blue release latches on the expansion-card cage. See Figure 3-17. Figure 3-17. Installing and Removing the Expansion-Card Cage 4 3 2 1 1 expansion-card cage 4 chassis pins (2) 2 pin collars (2) 6 Lift the cage straight up to clear the chassis. See Figure 3-17. 3 release latches (2) 78 Installing System Components