Dell PowerEdge 2970 Hardware Owner's Manual - Page 77
Replacing the Fan Bracket, Expansion-Card Cage, Removing the Expansion-Card Cage
View all Dell PowerEdge 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Figure 3-16. Removing and Installing the Fan Bracket 2 1 3 1 release latch 2 fan bracket 3 tabs (2) Replacing the Fan Bracket 1 Insert the two tabs on the right side of the fan bracket into the two slots on the system board tray. 2 Rotate the left end of the fan bracket down into the system until the release latch and plastic clip fully engage. 3 Reinstall the SAS controller daughter card. See "Installing a SAS Controller Daughter Card" on page 65. 4 Replace the fans in the fan bracket. See "Replacing a Cooling Fan" on page 64. 5 Reinstall the cooling shroud. See "Installing the Cooling Shroud" on page 75. 6 Close the system. See "Closing the System" on page 56. 7 Reconnect the system to the electrical outlet and turn on the system and attached peripherals. Expansion-Card Cage Removing the Expansion-Card Cage CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. Installing System Components 77